What materials are typically used in sheet metal fabrication?


  Sheet metal fabrication involves shaping metal sheets to achieve the desired appearance, primarily encompassing the manufacturing of sheet-metal enclosures, server racks, and various internal structural components and housings for machinery. Many everyday devices are produced through this process, such as queue-management terminals and ATMs in the banking sector, ubiquitous vending machines on the streets, and computer and monitor cases—all of which are fabricated via sheet-metal processing. In addition, to meet product functionality requirements, the sheet metals typically used in sheet-metal fabrication fall into the following main categories:

  1. Common Cold-Rolled Steel Sheet (SPCC)

  Common cold-rolled steel sheets are produced by continuously cold-rolling cast steel components on a cold-rolling mill to obtain thick steel plate stock or sheet stock with specified wall thickness. The surface lacks protective coatings and is highly susceptible to oxidation and rust; therefore, prior to use, it must undergo protective treatments such as spray coating or electroplating.

  2. Galvanized steel sheet

  One type is electrogalvanized steel sheet (SECC), which is produced by degreasing, pickling and passivation, electroplating, and various post-treatment processes applied to thick steel sheets. It offers excellent formability, outstanding corrosion resistance, and an aesthetically pleasing appearance. Electrogalvanized steel sheet is widely used in the fabrication of computer chassis and other sheet-metal enclosures.

  Another type is hot-dip galvanized steel sheet (SGCC). Hot-dip galvanizing of coil steel involves processing semi-finished products—whether hot-rolled and pickled-passivated or cold-rolled—through cleaning, quenching, and immersion in a molten zinc bath at approximately 460°C, thereby depositing a zinc coating on the steel sheet. The material is then subjected to aging treatment, leveling, and further chemical finishing. Compared with SECC, SGCC exhibits higher hardness, poorer formability (which necessitates avoiding deep-drawing designs), a thicker zinc coating, and inferior arc-welding performance.

  3. Stainless steel

  Stainless steel sheets exhibit excellent physical properties, and different alloy compositions can yield distinct characteristics, making them widely used in sheet-metal fabrication.